pitch point
英 [pɪtʃ pɔɪnt]
美 [pɪtʃ pɔɪnt]
节点；齿轮啮合节点
双语例句
- Pitch Point is the intersection of the spline tooth profile with the pitch circle.
节点是键齿的齿廓与节圆的交点。 - Their point of tangency is called the pitch point, and since it lies on the line of centers, it is the only point at which the tooth profiles have pure rolling contact.
大小齿轮的接触点称为节点，由于节点位于中心线上，因此节点是齿形轮廓线上唯一做纯滚动接触的点。 - Performance Analysis of Gear Drive with Equivocal Modification Meshing beyond Pitch Point; Of a selector, a moving contact that engages with the contacts of a bank.
等变位节点外啮合齿轮传动性能分析与存储单元的触点相啮合的选择器滑动触点。 - GIS based on Web Services causes the spatial data with different forms in different area and platform to be possible in the on-line free pitch point to realize separately and provide services for others.
GIS和WebServices的结合使得不同地域、不同平台、不同格式的空间数据可以在网上任意节点上分别实现并对外提供服务，从而可以促进解决电子政务中各种空间信息的真正共享和互操作问题。 - With the finite element method the component section is divided into the m × n grid, each grid central point namely is pitch point while anglicizing the temperature field, a new numerical calculation model is deduced and the calculation code is programmed.
用有限单元法的思想将构件截面划分为m×n的网格，各个网格的中心点即为温度场分析时的节点，推导出一种新的构件刚度数值计算模型并编制了计算程序。 - This paper is about a pitch point meshing analysis of involute worm gearing in which its worm is placed between worm wheels The analysis is done through movable system of coordinate and the calculation of the contact line, the induced curvature and the lubrication angle is carried out.
用活动标架法对双节点侧置双蜗轮渐开线蜗杆传动进行啮合分析，对接触线、诱导曲率及润滑角进行了计算。 - The method of pitch point in the calculation for the edge of hob shape shadow
滚刀刃形计算的节点法 - This article systematically discussed two kinds of encryption technology: Symmetrical expression encryption, public key encryption, as well as three encryption ways in network: link encryption, pitch point encryption and end-to-end encryption.
该文系统地讨论了两种加密技术：对称式加密、公开密钥加密，并探讨了网络中的三种加密方式：链路加密、节点加密和端到端加密。 - Results The highly effective laboratory dynamic examination information monitoring management system management system, has realized each kind of examination flow pitch point monitoring, standard laboratory examination management.
结果高效的实验室动态检测信息化监控管理系统，实现了各种检测流程的节点监控，规范实验室的检测管理。 - If regards each part as the pitch point, and draw a line in two parts that are semantically relate to another one, then we obtained a connection network.
如果把各个部分视为节点，并在两个有语义联系的部分之间引一条边，那么我们就得到了一个关联网络。 - It is necessary to calculate the coordinates of the pitch point in designing a spiroid gearing.
设计锥蜗杆传动，必须计算节点坐标。 - Performance Analysis of Gear Drive with Meshing beyond Pitch Point
节点外啮合齿轮传动的性能分析 - In order to improve the performances of sensing devices, the approach of enlarging and deepening the pitch point aperture of resonant beam has been utilized.
本文从影响敏感器件性能的主要弱点着手，采取扩大和加深振梁节点孔径的设计方案。 - The system uses the fixed pitch point, the combination flow design thought, causes the archives to past is not fixed the flow the restraint, by strengthened the system serviceability and the continuous nature.
系统采用固定节点、组合流程的设计思想，使得公文的流转不受固定流程的约束，以增强系统的适用性与延续性。 - This article introduces the design idea and experiences in innovating process of bi-directional HFC network, the design ideas of light pitch point, the optical cable skeleton line and the assignment network.
介绍了临钢双向HFC网络的改造过程中的设计思路及经验，光节点、光缆干线及分配网络的设计思路。 - The BP algorithm is at present applies the most widespread neural network study algorithm, but primitive algorithm speed of convergence slow, the training process is easy to fall into the partial minimum as well as the choice of the hidden level pitch point is difficult.
BP算法是目前应用最为广泛的神经网络学习算法，但原始算法收敛速率慢，训练过程易陷入局部极小值以及隐层节点数选择困难。 - The maximum pressure, the maximum friction coefficient and the highest film temperature all occur in the vicinity of pitch point.
齿轮啮合过程中的最大油膜压力、最高油膜温升和轮齿间摩擦因数最大值都发生在啮合节点附近。 - Based on the pitch meshing theory of the worm drive, a new structure of the cylinder worm drive-the double pitch point and double side-placed worm gear drive is proposed in this paper.
以蜗杆啮合节点理论为基础提出一种圆柱蜗杆传动的新结构&双节点侧置双蜗轮传动； - The calculation formulas of general curvature radius and tooth face contact stress of the unsymmetric gear with double pressure angles were proposed at the upper and lower points of single and double teeth mesh areas and the pitch point.
推导出双压力角非对称齿轮在单、双齿啮合上、下界点和节点的综合曲率半径和齿面接触应力的计算公式，并用解析法对给定参数进行计算。 - This article proposes some viewpoints in view of bidirectional HFC topology, user quantity per light pitch point, the user network assignment way and reducing noise gathered.
针对双向HFC网络的拓扑结构、光节点服务的用户数、用户网络的分配方式和减少噪声汇聚几个问题，在设计上提出了一些观点和看法。 - The Solution for Pitch Point Angle of Spiroid Gears and Analysis of the Solution
锥蜗杆传动节点角的求解及解的分析 - The analysis result indicates that this union control mechanism can effectively reduces the time delay of the high speed pitch point and the jitter, under the premise of the system throughput handled enhance, but it exerts little influence to the system of total time delay.
分析结果表明此联合控制机制能在有效提高系统吞吐量的前提下，降低高速节点的延时和延时抖动，而对于系统总的延时影响不是很大。 - Wear at the pitch point is the least;
分度点处磨损量最小； - New Structure of the Cylinder Worm Drive& the Double Pitch Point Drive
圆柱蜗杆传动的新结构&双节点传动 - A New Formula for Calculating Pitch Point Coordinates of Spiroid Gears
锥蜗杆传动节点坐标新公式 - P2P ( Peer To Peer) means each pitch point in the distributional system is logically coordinated.
P2P（peertopeer，对等网络）是指分布式系统中的各个节点是逻辑对等的。 - Each pitch point of the system must be economical and conform to the green environment protection.
系统每一个节点都必须符合经济和绿色环保质的规定性。 - The parameters which influenced to the degree of mesh beyond pitch point have been analyzed.
对影响节点外啮合程度的各项参数进行了分析，完成了节点外啮合齿轮副的参数设计。 - The author put forward an assumption of lightweight workflow model based on pitch point and transference, which results from the research on existing workflow model technology such as Petri, etc. and is correspond to reality.
笔者通过研究Petri网等现有的工作流建模技术，结合系统的实际，提出了基于节点、迁移的轻量级工作流建模设想。